Sony bravia 40

This Super strong Dual Arm Universal wall mount will fit most flat panel plasma and LCD TVs with mounting patterns up to VESA 680x460. Note: Mounting holes on television should be 30 in. or less. Included in Box -Mount, Mounting hardware, User manual Warning: This mounting bracket is not compatible with certain LG (r), PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX, PRO151FD. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U, LG: LG52LG50-UA, LG52LG50 , Phillips 42PF9630A137

Price : $77.99

This universal tilting mount is a very rugged yet affordable up and down 15 degree tilt wall-mount bracket for TV's from 32 to 60 inches. The universal bracket offers both easy operation and great looks. You can lock the viewing position by simply tightening a knob no tools required! This stylish mount places your flat-panel TV a mere 3 inches from the wall and is UL and GS certified to hold up to 175 lbs. This TV mount combines heavy-gauge steel construction with outstanding fit and finish, and includes all necessary mounting hardware for flat back or curved TV's. Three large knockouts allow adequate space for junction plates and easy cabling. Install yours today in as little as 20 minutes with included installation manual. Mounting width supported: 50-770 mm Mounting height supported: 50-480 mm Supported VESA sizes: 75, 100, 200 x 100, 200, 400 x 200, 600 x 400.

Price : $24.89

The APDAM2 articulating arm mount features a flat profile of 4.25" profile from the wall to the back of your display and a full extension of 21" from the wall as well as +/-20 degrees of tilt. The APDAM3 mount is constructed with 30LBS of 100% High Grade Steel. The APDAM3's solid wall plate allows for quick and easy installation and will support a wide variety of stud applications up to 17" apart. The APDAM3 mount will fit the majority of LCD and Plasma Displays up to 55". Most LCD and Plasma displays 55" and smaller conforms to the VESA Standards. However, this mount will support most odd sized hole patterns that do not conform to the VESA Standards.

Price : $49.33

PRODUCT FEATURES:Fully adjustable 0-15 degree tilt angleUniversal design fits virtually all 32"-55" modelsSturdy construction holds up to 150LBS

Price : $24.99

Hercules "Super Strong" Features: Universal Mounting fits Most Flat Panel TV's from 32" to 60" Displays Casted from 2.0/2.5mm thick cold steel Tilts -15 to +15 Degrees Supports up to 175 lbs Universal mounting system Heavy duty dual arms Up to 20.3" extension Patented tilt system Built-in bubble level Included safety screws prevent TV shifting

Price : $129.95

Offering great value and flexibility, our Universal Dual Arm model is perfect for mounting your new flat panel display. This mount offers solid construction with high quality materials.

Attractive design with a versatile side to side swiveling mechanism allows you to watch television from any angle in the room. Included in Box: Mount, Mounting hardware and the User manual.



Warning: This mounting bracket is not compatible with certain LG (r), PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX, PRO151FD. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U, LG: LG52LG50-UA, LG52LG50, Phillips 42PF9630A137

Price : $55.99

Will fit most large flat panel Sony plasma and LCD TVs with mounting patterns up to 55 in. *Mounting holes on television should be 28" or less apart horizontally & 18" or less apart vertically.

Price : $78.99

Will accommodate sets with hole patterns as follows: Your holes should be 30" or less Horizontally and 18.75" Vertically. Anything under those measurements will work with your set. Will fit most large flat panel plasma and LCD TVs with mounting patterns up to VESA 770x480.
*Mounting holes on television should be 30" or less apart horizontally & 18.75" or less apart vertically.
Maximum weight capacity: 125lbs

Dimensions -

Front plate: 32" x 9 3/8"*
Wall plate: 18.9" x 9.37"*
*Measurements are from edge to edge. Mounting points for bolts will be shorter.

Range of Motion -

Tilt: -15 to +15 degree up and down.
Swivel: -90 to +90 degree side to side
Extension from wall: 5" to 26.5"

Design & Construction:

Solid 2.5mm heavy-gauge cold steel construction
Durable powder-coated finish in black
Easy installation.

Included in Box -

Mount
Mounting hardware
User manual

WARNING: This mounting bracket is not compatible with certain LG (r), PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX, PRO151FD. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U, LG: LG52LG50-UA, LG52LG50, Phillips 42PF9630A137

PLEASE HAVE PROFESSIONALLY INSTALLED. DIYAVSUPPLY LLC. AND IT'S OWNERS ACCEPT ZERO LIABILITY FOR INSTALLATIONS RESULTING IN PROPERTY DAMAGE OR HUMAN INJURIES INCLUDING DEATH.

ATTN SELLERS: This product and it's UPC are the sole property of DiyAVSupply. DO NOT CLICK ON "SELL YOURS HERE" You will be reported for UPC infringement. Thank you.

Price : $85.00

This is our best selling swivel tv mount, and for good reason. It offers extreme versatility with a maximum extension of 20 inches from the wall. The dual arm design is incredibly sturdy, and supports a wide range of plasma and LCD flat screen televisions. Do you prefer the look and feel of the dual arm design, and appreciate its incredibly sturdiness? Does a 20 inch wall extension meet your installation needs? Then this mount is for you! This mount works with 99% of flat screen TVs on the market. For 100% certainty, however, please refer to the Compatibility Checklist below. Compatibility Checklist * Mounting holes on television should be 30 inches or less apart horizontally & 18.75 inches or less apart vertically. This corresponds to a maximum vesa of 750×450 * Your TV should weigh less than 175lbs/ 79 kg. * This mounting bracket is not compatible with certain PIONEER and Sharp® brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U. Dimensions * Front plate: 32 inches x 9 3/8 inches * Wall plate: 19 11/16 inches x 11 inches * Measurements are from edge to edge. Mounting points for bolts will be shorter. Range of Motion Design & Construction * Solid 2.5mm heavy-gauge cold steel construction * Durable powder-coated finish in black * Easy installation. Included in Box * Mount * Mounting hardware * User manual

Price : $84.99

Mount your LCD/Plasma TV near the wall with a Digicom low profile mount. This Digicom wall mount features a simple to install design that will accomidate most TV's from 20" to 37" and up to 99 Lbs reliably. The horizontal position of the TV can be adjusted once TV is mounted. The mount can be installed in concrete or wood studs.

Price : $27.25

Enhance your viewing experience with this TV wall mount.Fully articulating arm for displays ranging from 32" to 52" LCD and LED. Television mount constructed of durable heavy gauge steel.

Price : $49.99

Enhance your viewing experience with this TV wall mount.Fully articulating arm for displays ranging from 32" to 52" LCD and LED. Television mount constructed of durable heavy gauge steel.

Price : $49.99

TV stays 3 1/4" away from the wall. 30" wide wall plate supports block wall installation or installation on either 8", 12" or 16" wall studs. The 1/8" thick steel wall plate also has 2 pass-through holes so that cables and cords can be fished into the wall interior for a clean installation look. This universal wall mount attaches to any flat screen with a mounting hole pattern up to 28" wide by 19" tall. Safety screws provided to prevent the TV from sliding out from the side. Installation instructions included. Mounting hardware included to fit most TV models.

Price : $49.99

This is our best selling swivel tv mount, and for good reason. It offers extreme versatility with a maximum extension of 20 inches from the wall. The dual arm design is incredibly sturdy, and supports a wide range of plasma and LCD flat screen televisions. Do you prefer the look and feel of the dual arm design, and appreciate its incredibly sturdiness? Does a 20 inch wall extension meet your installation needs? Then this mount is for you! This mount works with 99% of flat screen TVs on the market. For 100% certainty, however, please refer to the Compatibility Checklist below. Compatibility Checklist * Mounting holes on television should be 30 inches or less apart horizontally & 18.75 inches or less apart vertically. This corresponds to a maximum vesa of 750×450 * Your TV should weigh less than 175lbs/ 79 kg. * This mounting bracket is not compatible with certain PIONEER and Sharp® brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U. Dimensions * Front plate: 32 inches x 9 3/8 inches * Wall plate: 19 11/16 inches x 11 inches * Measurements are from edge to edge. Mounting points for bolts will be shorter. Range of Motion Design & Construction * Solid 2.5mm heavy-gauge cold steel construction * Durable powder-coated finish in black * Easy installation. Included in Box * Mount * Mounting hardware * User manual

Price : $84.99

The New Articulating mounts (includes LCD Plate) are stunning pieces of engineering, and are the most flexible mounts for flat panel displays. The cantilever mounts offer maximum adjustability, including horizontal extension, 180º of lateral rotation, as well as full swivel and tilt capabilities. More than just mounting hardware, these cantilever mounts have a tactile quality that enhances the high technology aspects of any flat panel installation.

Price : $94.99

This is our best selling swivel tv mount, and for good reason. It offers extreme versatility with a maximum extension of 20 inches from the wall. The dual arm design is incredibly sturdy, and supports a wide range of plasma and LCD flat screen televisions. Do you prefer the look and feel of the dual arm design, and appreciate its incredibly sturdiness? Does a 20 inch wall extension meet your installation needs? Then this mount is for you! This mount works with 99% of flat screen TVs on the market. For 100% certainty, however, please refer to the Compatibility Checklist below. Compatibility Checklist * Mounting holes on television should be 30 inches or less apart horizontally & 18.75 inches or less apart vertically. This corresponds to a maximum vesa of 750×450 * Your TV should weigh less than 175lbs/ 79 kg. * This mounting bracket is not compatible with certain PIONEER and Sharp® brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U. Dimensions * Front plate: 32 inches x 9 3/8 inches * Wall plate: 19 11/16 inches x 11 inches * Measurements are from edge to edge. Mounting points for bolts will be shorter. Range of Motion Design & Construction * Solid 2.5mm heavy-gauge cold steel construction * Durable powder-coated finish in black * Easy installation. Included in Box * Mount * Mounting hardware * User manual

Price : $84.99

The APDAM3 articulating arm mount features a flat profile of 4.5" profile from the wall to the back of your display and a full extension of 21" from the wall as well as +/-15 degrees of tilt. The APDAM3 mount is constructed with 28LBS of 100% High Grade Steel providing a sturdy and reliable mount. The APDAM3's solid wall plate allows for quick and easy installation and will support a wide variety of stud applications up to 17" apart. The APDAM3 mount will fit the majority of LCD, LED and Plasma Displays up to 63". Most LCD and Plasma displays 63" and smaller conforms to the VESA Standards. However, this mount will support most odd sized hole patterns that do not conform to the VESA Standards.

Price : $69.96

The New Articulating mounts (includes LCD Plate) are stunning pieces of engineering, and are the most flexible mounts for flat panel displays. The cantilever mounts offer maximum adjustability, including horizontal extension, 180º of lateral rotation, as well as full swivel and tilt capabilities. More than just mounting hardware, these cantilever mounts have a tactile quality that enhances the high technology aspects of any flat panel installation.

Price : $94.99

This is the finest of our various tilt wall mounts for 32-63" TVs. Its Universal design will fit 99% of today's displays. This is a very solid mount weighing over 17 lbs. The APTMP2 has Dual Chrome Crossbars for Side to Side Adjustment, Dual Locking Bars, Extra Large Dual Tilt Adjustment Knobs, and extra thick textured Powder Coat paint for a clean finish. Similar mounts sell at retail for well over $200. If you want a top of the line, guaranteed, no-hassle mount, then this mount is for you.

Price : $33.00

Turn your television into a showpiece with the SU-FL71M TV stand. Designed specifically for 32" class to 46" BRAVIA LCD HDTVs, this smart and sleek stand is the perfect addition to your home entertainment system.

Price : $549.99